Advertisement
714-630-7144
5. We recommend securing the trailer to the wall at its final storage
location. This can be accomplished by securing the safety chain to an
eye-bolt in the wall that would support the falling weight of the trailer.
Please use best judgment when securing a trailer to a wall or other
solid piece of framework.
6. Remember, should you have any questions, please call Kendon
Industries directly at 800-847-8618 or 714-630-7144.
Care and Maintenance of Go! Series Trailers
Care of diamond plate:
Aluminum diamond plate is beautiful, strong and lightweight. It is an
engineered and designed choice by Kendon for those reasons. Diamond plate
is only supported under the rails in line with the wheels of the motorcycle and
certain areas for foot placement during ride-up loading; DO NOT stand or jump
on unsupported areas between the rails.
DO NOT use harsh chemicals for cleaning. Use commercial motorcycle or
automobile car wash detergents for cleaning and aluminum polish to keep its
original beauty.
DIAMOND PLATE NOT WARRANTED AGAINST DENTING
Motorcycles must be firmly tied down with the front and rear tie-down points
as explained in this owner's manual. Failure to properly tie down the rear
section of motorcycle(s) can cause rear of bike to hop or move resulting in
the rear wheel landing on unsupported diamond plate.
Hub Greasing/Repacking Bearings:
CHECK AND REPACK BEARINGS AFTER FIRST 500 MILES AND EVERY
6 MONTHS OR 2000 MILES THEREAFTER. HIGHER MILEAGE USE MAY
Recommended Tools:
1. Socket Wrench with 1-1/8" or 29 mm Socket
2. 13/16" or 21 mm Lug Wrench (for ½" Lug Nuts – Wheels & Spare Tire)
3. 7/16" or 11 mm Combination Wrench
4. Torque Wrench
5. Rubber Mallet
REQUIRE MORE FREQUENT INSPECTIONS.
- 22 -
www.KendonUSA.com
Advertisement
