Kendon Stand-Up GO! Series Owner's Manual page 25

714-630-7144
6. Pliers
7. Flat Head Screwdriver
8. Lucas Oil Red N' Tacky Grease
Although not required, it is recommended to remove the entire hub to fully
repack bearings with fresh grease every 6 months or 2000 miles. Higher
mileage use may require more frequent inspections.
Note: By simply adding grease to used and/or dirty bearings it will not clean
the bearings. Adding grease simply flushes the existing worn grease and/or
dirt deeper into the bearings and further spreads it out. We recommend
repacking and cleaning bearings before re-greasing them.
Typical End Unit/Hub Assembly
- 23 -
www.KendonUSA.com