13
Servicing position of the sewing head
.04
5
Fig. 13 - 01
Bring the sewing head into the servicing position
●
Open cover
●
Loosen screws
arrow.
●
Swing up frame
●
Open clamping lever
●
Pull back the sewing head to the stop limit and tilt it back if necessary.
For maintenance and adjusting work the sewing head can be lifted out of the
machine stand.
3
4
Switch off the machine!
Danger of injury if the machine suddenly starts running!
1 and the clamping lever on the loading clamp.
2 and slide the loading clamp to the stop limit in the direction of the
3 and secure support 4.
5.
Use both hands to tilt back the sewing head!
Adjustment
1
2
2
67