Hook Position Crossways To Sewing Direction - Pfaff 3538-20/02 Adjustment Manual

13

Hook position crossways to sewing direction

.05.09
Rule
The hooks 1 should be parallel to the needle plate recess.
1. If the hook points are at the needle midpoint,
2. there should be a clearance of 0.1 mm between the hook point and the needle.
1
Fig. 13 - 09
Set the hook point at the needle midpoint by turning the handwheel.
Align the hook 1 (screws 2) according to rule 1.
Adjust the bracket 3 (screws 4) according to rule 2.
2
0.1 mm
1
3
4
Adjustment
13