Adjustment
13
Retraction depth of the loading table
.07 .03
●
●
●
86
Requirement
1.
With the loading table retracted, there must be a distance of
front edge of the table and the center of the needle hole.
2.
With the loading table extended, screws
1
2
Fig. 13 - 19
Turn screws
1 (nuts 2) so far that they no longer touch the limit stops.
Adjust cylinder (screws
Adjust screws
1 (nuts 2) in accordance with requirement 2.
4 must touch the
3 on cylinder holder 4) in accordance with requirement 1.
12 mm between the
stops.
3
3
4
1
2