13
Adjusting the sewing head
.05
13
Adjustment aids
.05.01
Fig. 13 - 02
●
Turn the balance wheel until the needle bar is approximately in the required position.
●
Fit adjustment gauge
fraction backwards and forwards, until the adjustment gauge fi ts properly.
With the help of adjustment gauge 1 (part no. 95-752 474-05) the needle bar
can be fi xed in the needle rise position (needle bar position 1.8 mm below b.d.c.)
1
1 as shown in Fig. 13-02. If necessary, turn the balance wheel a
Adjustment
69