Setting The Stitch Count Function For Controlling The Amount Of Bobbin Thread; Bobbin Thread Control On The Sub-Class -926/06 (Optional) - Pfaff EcoDrive P40 ED Instruction Manual

1

Setting the stitch count function for controlling the amount of bobbin thread

.04
Switch on the machine.
2x
Press the TE/Speed key twice to call up the parameter input function.
No
Select the parameter "760" by pressing the corresponding +/- key.
VAL Press the corresponding +/- key to set the number of remaining stitches, which can still
be sewn after recognition by the bobbin thread control function.
The selected value is multiplied by 10* or 200** and the result is the number of stitches.
Example display 5 x 200** = 1000 stitches. The setting depends among other things on
the thread strength.
If the TE/Speed key is pressed, the value is taken over and the machine changes into the
sewing mode.
1

Bobbin thread control on the sub-class -926/06 (optional)

.05
TE
No
101
A
TE
No
760
A
The bobbin thread rest counter can only be used, if parameter "660" is set at
value "1" or "2".
* If for parameter 660 the value is "1", the multiplier is 10
** If for parameter 660 the value is "2", the multiplier is 200
Setting the bobbin thread control function, see the instruction manual for
-926/06.
VAL
ON
VAL
5
Controls
5