Programming With The "Teach Function - Pfaff EcoDrive P40 ED Instruction Manual

2

Programming with the "teach function"

.03.02
seam segment 3
Example:
Seam segment 1
Functions: Programmed stop and raising foot at the end of the seam,
Seam segment 2
Functions: Programmed stop and raising foot at the end of the seam,
Seam segment 3
Functions: Programmed stop, raising foot at the end of the seam and thread trimming
Switch on the machine.
Press the PM key to select the enter program function.
The text "PM" must appear on the display.
Press the TE/Speed key to call up the "teach function".
Select the program number "2" with the corresponding +/- key.
Press the scroll key.
With the corresponding +/- key, set the program with 3 3 3 3 3 seam segments.
By entering the value "0" with the corresponding +/- key, stipulate that no program linking
will take place.
2x
Press the scroll key.
program 2
seam segment 2
PM
TEACH
2 1 49
PM
1000 3 0
Sewing
seam segment 1
11