3
Adjustment
3
Hardware-test
.01
The hardware test is a test program, which makes it possible, with the aid of the control
panel, to check various components of the control system and the machine installation.
The test consists of seven test blocks.
3.
Carrying out the hardware test
01.01
Switch on the machine.
Select service level "C" (see Chapter 2.06.01 Selecting the user level).
Select parameter 797 and set it at "ON" by pressing the appropriate +/- key.
The first test block appears on the display.
The next test blocks can be selected by pressing the +/- "A" key.
The individual inputs and outputs can be selected by pressing the +/- "B" key.
E 1
A
3.
Test block 1 – inputs
01.02
E 1
Input
Input number
The functions allocated to the inputs displayed can be found in Part 3 Parameter list and
connection plan.
X 5:
5
0
B
X5:
5
0
Input status
Connector
0 = switch open
1 = switch closed
Contact
number
Adjustment
17