Pfaff EcoDrive P40 ED Instruction Manual page 17

With the corresponding +/- key, select the seam segment "3".
Press the programmed stop key to switch on the function.
By pressing the raise foot after seam segment key, switch on the function.
Press the thread trimming key to switch on the function.
The program end is recognized automatically through the thread trimming
function.
Sew seam segment "3".
TEACH
The number of stitches is shown on the display.
Press the TE/Speed key.
The machine carries out a thread trimming operation automatically and changes to the
beginning of the program.
The previously created program appears on the display with seam segment 1.
Sewing a test seam
Sew the test seams by using the pedal functions.
PM
TEACH
2 3 49
PM
2 1 49
Sewing
13