Pfaff EcoDrive P40 ED Instruction Manual page 14

Sewing
2x
Sewing a test seam
10
1
With the corresponding +/- key, select the seam segment " " " " " 3" " " " " .
With the corresponding +/- key, enter the value "20" for the number of stitches.
Press the programmed stop key to switch on the function.
By pressing the raise foot after seam segment key, switch on the function.
1
With the corresponding +/- key, select the seam segment "4".
With the corresponding +/- key, enter the value "10" for the number of stitches.
Press the end backtacks key to switch on the backtacking stitch function at the end of
the seam.
Press the programmed stop key to switch on the function.
By pressing the raise foot after seam segment key, switch on the function.
Press the thread trimming key to switch on the function.
The program end is recognized automatically through the thread trimming
function.
Press the PM key twice to move to the beginning of the program.
The previously created program appears on the display with seam segment 1.
1
Sew the test seams by using the pedal functions.
PM
3 20
PM
4 10
PM
1 20