Pfaff EcoDrive P40 ED Instruction Manual page 13

Sewing
PM
1000 4 0
With the corresponding +/- key, set the program with 4 seam segments.
By entering the value "0" with the corresponding +/- key, stipulate that no program linking
will take place.
2x
Press the scroll key twice.
PM
1 1 20
With the corresponding +/- key, select the seam segment "1".
With the corresponding +/- key, enter the value "20" for the number of stitches.
Press the start backtacks key to switch on the backtacking stitch function at the
beginning of the seam.
Press the programmed stop key to switch on the function.
By pressing the raise foot after seam segment key, switch on the function.
PM
1 2 10
With the corresponding +/- key, select the seam segment "2".
With the corresponding +/- key, enter the value "10" for the number of stitches.
Press the programmed stop key to switch on the function.
By pressing the raise foot after seam segment key, switch on the function.
9