3.
Test block 5 –light barrier
01.06
LS
Light barrier
The status of the light barrier can be checked here.
3.
Test block 6 – thread monitor
01.07
FW
Thread
monitor
The analogue value of the thread monitor is shown here in %.
3.
Test block 7 – data transfer
01.08
With the B+ key all data is transferred from the control unit to the "Quick-Prog.-Device".
With the D+ key all data is transferred from the "Quick-Prog.-Device" to the control unit.
0
0 = off
1 = on
0%
Analogue value of the
thread monitor.
update Data
B+
QP
D+
QP
D
B
Before transferring data please observe the "Quick-Prog.-Device" instruction
manual.
(only on subclass -926/06)
Adjustment
19