Operation - Dimplex SWM4220 Owner's Manual

Operation

The wall-mount fireplace can be operated with the multi–function IR remote control or
from the touchscreen controls on the front glass of the fireplace.
Once the fireplace is turned on the digital display and the control icons on the front glass
will illuminate. If no button or icon is pressed within 10 seconds, the fireplace controls
will deactivate by turning off the digital display first and then the icons. To reactivate the
controls press any button on the remote or touch any icon on the front glass.
1. Power ON/OFF
2. Flame Control
3. Heat Control
4. Timer Control
5. Ember Bed
6. Level Selection
7. Backlight Control
8. Digital Display
!
The heater on your fireplace may emit a slight, harmless odor when first
NOTE:
used. This odor is a normal condition caused by initial heating of internal heater
parts and will not occur again.
CUTOFF SWITCH
!
There is a safety temperature cutoff switch (cutout) inside the heater. If the
NOTE:
heater overheats, the cutout will shut off the supply power.
It can be reset by unplugging the unit and waiting 5 minutes before plugging the
unit back on.
If you need to continuously reset the heater, unplug the unit and call
CAUTION:
technical service at 1-888-346-7539.
14
6
5
3
7
1
2
4
8
8
6
5
4
3
2
1