Dimplex SWM4220 Owner's Manual page 15

Operation
POWER ON/OFF
The Power ON/OFF button turns the fireplace ON and OFF. When the fireplace is
OFF, pressing the Power ON/OFF button on the remote control or touching the icon
on the front glass will turn ON the fireplace. If the Power ON/OFF button is pressed
again within 10 seconds it will turn OFF the fireplace. With inactive controls, press
twice to turn OFF the fireplace. The first press on the Power ON/OFF button lights
up the touchscreen icons and activates the controls.
The fireplace has a built-in memory function. When the fireplace is turned back
on, the display will show the last selected function and it will start at the last used
settings (except timer). If the fireplace is disconnected from the main power source,
it will restart at the default settings.
FLAME CONTROL
This button is used to turn
flames ON, alter flame color and
to turn flames OFF.
Press the Flame Control button
multiple times to cycle through
the following options: While
L4, L3 or L2 is displayed, press
the Level Selection button to change the brightness of the flames from the available
options: 3- High, 2- Medium and 1- Low.
When the dynamic color rotation is selected and L1 is displayed, press the Level
Selection button to change the color transition speed. Three speed options are
available: 1- Slow, 2- Medium, 3- Fast.
HEAT CONTROL
Press the Heat Control button once to turns the heater ON and OFF.
With the Heat ON and set temperature displayed, press the Level Selection multiple
times to cycle through the 11 temperature settings: 82°F, ON, 64°F, 66°F, 68°F,
70°F, 72°F, 74°F, 76°F, 78°F, 80°F (27°F, ON, 18°C, 19°C, 20°C, 21°C, 22°C, 23°C,
24°C, 25°C, 26°C).
ON means the heater will work continuously.
Button Press
1st Press
2nd Press
3rd Press Red, Yellow & Blue
4th Press
5th Press
Flame Color
Red & Yellow
Blue
Color Rotation
OFF
Display Value
L4
L3
L2
L1
NONE
15