Allied Telesis AT-FS705EFC Installation Manual page 38

10/100 mbps ethernet switches
Hide thumbs Also See for AT-FS705EFC:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
Standards: This product meets the following standards.
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.

1
RFI Emission

2
WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.

3
Immunity

4
Electrical Safety

5
WARNING: Class 1 Laser product.

6
WARNING: Do not stare into the laser beam.

7
ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the LAN
cables.

8
LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.

9
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-
ENERGIZE EQUIPMENT, disconnect the power cord.

1 0
PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment
and shall be easily accessible.

1 1
CAUTION: Air vents must not be blocked and must have free access to the room
ambient air for cooling.

1 2
OPERATING TEMPERATURE: This product is designed for a maximum ambient
temperature of 40° degrees C.

1 3
ALL COUNTRIES: Install product in accordance with local and National Electrical
Codes.
28
U.S. Federal Communications Commission
Industry Canada
FCC Part 15 (Class A), EN55022 (Class A)
EN55024
UL 1950 (UL/cUL), EN60950 (TUV), EN60825

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-fs706efc

Table of Contents