Allied Telesis AT-FS705EFC Installation Manual page 23

All manuals and user guides at all-guides.com
If your network consists of several AT-FS705E FC and AT-FS706E FC
switches, then you will probably want to connect them together to form an
integrated network. Here the fiber optic ports can be extremely useful. You
can use the ports to create a fiber optic backbone. With a maximum operating
distance of 2 kilometers (1.25 miles), the ports can be used to connect together
switches that are physically far apart. In the topology shown in Figure 5, two
AT-FS705E FC switches and one AT-FS706E FC switch have been
interconnected using the fiber optic ports.
AT-FS705E FC
1 2 3
100 Mbps (Fiber Optic)
100 Mbps (Twisted Pair)
10 Mbps
AT-FS705E FC and AT-FS706E FC Installation Guide
1 2 3 4 TX 5
DC In
4 TX 5 RX
3.3V
Figure 5 Backbone Topology
AT-FS706E FC
DC In
RX TX 6 RX
3.3V
AT-FS705E FC
1 2 3 4
DC In
TX 5 RX
3.3V
13