Recording From An Externally Connected Component - Sony Giga Juke NAC-HD1E Operating Instructions Manual

Automatic detection of music and
talk (for Radio Music and Radio
Talk channels)
When "Track mark" is set to "Auto" in the
FM/AM function, the unit distinguishes
between music and talk and records those
contents to different tracks.
When you play the contents in the HDD
Jukebox, you can play only music contents
or talk contents by changing the list (pages
35 and 38).
Note
Even when "Track mark" is set to "Auto" , the unit
may not be able to distinguish perfectly between
music and talk, depending on the sound.
Tips
 When recording is done with "Track mark" set to
"Auto, " the track titles will consist of [T] (talk) or
[M] (music), date, starting time of recording and
radio station name (or band and frequency if no
name is registered):
 When recording is done with "Track mark" set
to "Auto, " the recorded contents are categorized
as either a Radio Talk or Radio Music channel in
x-DJ.
Recording from an externally connected
component
You can record analog or digital material
to the HDD Jukebox from the external
component (such as a turntable or MD
deck) connected to the unit or an amplifier.
See page 80 for details on connecting the
amplifier.
1
Select the external component
(source) from which you want to
record on the amplifier.

GB
2
Press ANALOG IN or DIGITAL IN to
select the function.
You can set the following items in the
Option menu of the ANALOG IN and
DIGITAL IN functions (pages 28 to
30).
 F ormat
 B it rate
 T rack mark
 L EVEL SYNC level
 S MART SPACE
 A uto title
 R ecording destination
3
If you select the DIGITAL IN function,
press  /  to select [Coaxial] or
[Optical] on the main display.
4
Play the source connected to the
amplifier.
5
Press HDD REC .
Recording starts.
6
Press HDD REC .
Recording stops.
The display changes to the main display
automatically after the recording stops
and the title information is obtained
(only when "Auto title" is set to "On"
and "Track mark" is set to "LEVEL
SYNC").
To pause recording, press HDD REC
.
To adjust the input level (when a
component is connected to the
ANALOG IN jack only)
You can change the input level on the unit.
When the input level is low (as it is when
recording from a portable device through
ANALOG IN), set the sensitivity to [High
sens.].
Enter the Option menu and select [Setting]
– [Switch In sens.] – [Normal] or [High
sens.].