Table of Contents
Advertisement
Track mark
Track marks are added automatically
during recording with the FM/AM,
ANALOG IN, or DIGITAL IN function.
The interval between track marks can be
specified. When "Track mark" is set to
"Auto" during the FM/AM function, the
unit distinguishes between music and talk
and adds a track mark between them.
FM/AM
every 10 min
The unit adds a track mark
automatically at specified
every 30 min
time intervals.
every 60 min
every 120 min
LEVEL SYNC
The unit adds a track mark
according to the input level.
Auto
The unit adds a track mark
between music and talk.
(
Factory setting)
ANALOG IN and DIGITAL IN*
every 10 min
The unit adds a track mark
automatically at specified
every 30 min
time intervals.
every 60 min
every 120 min
LEVEL SYNC
The unit adds a track mark
according to the input
level.
(
Factory setting)
* When you record from a CD, MD, or DAT deck
through DIGITAL IN, track marks are added at
the specified time intervals and wherever they
appear in the source.
LEVEL SYNC level (FM/AM and
ANALOG IN functions only)*
You can set the detection level of the
input signal at which a track mark is
automatically added.
Setting range:
If the unit is having
–96dB to 0dB
trouble detecting the sync
–50.0dB
level due to noise, set the
level higher. The level is
factory set at –50.0 dB.
(
Factory setting)
* The function can be used only when "Track mark"
is set to "LEVEL SYNC".
Note
When you record through DIGITAL IN, the sync
level is automatically fixed to –84.0 dB.
SMART SPACE (ANALOG IN and
DIGITAL IN functions only)
On
When there is no sound input for
3 seconds or more, the SMART
SPACE function replaces this
interval with a blank of 3 seconds
long. The unit automatically pauses
recording when there is no sound
input for 30 seconds or more, and
stops recording when there is no
sound input for 10 minutes or
more. The unit detects the silent
portions according to the setting of
LEVEL SYNC level.
Off
The SMART SPACE function is not
used.
(
Factory setting)
Note
When you record from a CD, MD, or DAT deck
through DIGITAL IN, the SMART SPACE function
is automatically set to "Off ".
GB
Advertisement
Table of Contents
