Table of Contents
Advertisement
Outputs
Jack/
Name of
jacks/
connector
type
connectors
Phono
ANALOG
OUT 1
jack
ANALOG
OUT 2
PHONES
Stereo
standard
jack
Phono
DIGITAL
COAXIAL
jack
OUT
Square
DIGITAL
OPTICAL
optical
connector
OUT
Phono
MONITOR
OUT
jack
Other terminals/ports/jacks
Antenna terminals
FM: 75
unbalanced
AM: External antenna terminals
NETWORK port:
10BASE-T/100BASE-TX
USB connecting jack:
USB type A, Hi-Speed USB for connecting USB
devices such as "WALKMAN" (ATRAC AD)
Audio characteristics
Frequency response:
5 Hz - 20 kHz
Total harmonic distortion (HDD playback):
0.0035 % or less
Total harmonic distortion (analog recording/
playback):
0.0040 % or less
Signal-to-noise ratio (HDD playback):
103 dB or more
Signal-to-noise ratio (analog recording/playback):
98 dB or more
Dynamic range (HDD playback):
98 dB or more
Dynamic range (analog recording/playback):
95 dB or more
Output
Load
level
inpedance
2 Vrms
10 k
(at 47 k
or more
)
15 mW
32
0.5 Vp-p
75
–18 dBm
(Wave
length:
660 nm)
1.0 Vp-p
75
General
Power requirements:
230 V AC, 50/60 Hz
Power consumption:
48 W (0.5 W or lower at the standard start-up
mode)
Dimensions (w/h/d) (Approx.):
430 × 110 × 290 mm incl. projecting parts and
controls
Mass (Approx.):
7.2 kg
Operating temperature:
+5
C (+41
F) to +35
Operating humidity:
25 % to 80 %
Supplied accessories:
Audio connecting cord (1)
FM wire antenna (1)
AM loop antenna (1)
Remote control (1)
LR6 (size AA) batteries (2)
Operating Instructions (1)
Quick connection and operating guide (1)
U.S. and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
Standby power consumption : 0.5 W
Halogenated flame retardants are not
used in the certain printed wiring boards.
Halogenated flame retardants are not
used in cabinets.
C (+95
F)
10
GB
Advertisement
Table of Contents
