Setting The Clock; Setting The Clock Manually - Sony Giga Juke NAC-HD1E Operating Instructions Manual

Setting the clock

The time on the clock must be correctly
set for the proper operation of functions.
You can set the clock either manually or by
connecting to the Internet.

Setting the clock manually

1
Enter the Setup menu, select [Clock
setting], and then press ENTER.
2
Select [Online auto-sync clock setting]
and press ENTER.
3
Select [Off ] and press ENTER.
4
Select [Date input] and press ENTER.
5
Press  /  to select the year/
month/day, and press  /  to adjust
the value.
The date is set in order of year, month
and day.
6
Press  /  to select the hour/
minute, press  /  to set the value,
and then press ENTER.
7
Select the desired city from the [Time
zone] setting.
If the desired city does not appear
in the [Time zone], select a city that
is within the same time zone as the
desired city.
1
GB
8
Select [Standard] or [Summer time]
for the [Summer time] setting.
9
Select [Apply] and press ENTER.
The time appears in [Current time].
10
Select [Close] and press ENTER.
Note
When the time setting display appears after the
power is turned on, the display automatically
disappears if no operation is performed for a while.
If the time is not set correctly, set the time correctly
using the Setup menu.
To change the date and time
format
You can select an M/D/Y, D/M/Y, or Y/M/
D format for the date and a 12-hour or 24-
hour format for the time.
1
Enter the Setup menu, select [Screen
setting], and then press ENTER.
2
Select the date and time format.
When selecting the date format:
Select [MM/DD/YYYY], [DD/MM/YYYY],
or [YYYY/MM/DD] for the date format
setting.
When selecting the time format:
Select [HH:MM] (24-hour system) or [HH:
MM AM/PM] (12-hour system) for the time
format setting.
3
Select [Execute] and press ENTER.