Recording From Cds - Sony CDP-CA70ES Operating Instructions Manual

Recording From CDs
EE EE er
Recording Your Ovvn Program
You can record the program you've created on a tape,
etc. The program can contain up to 32 steps.
By inserting a pause during programming, you can
divide the program into tvvo for recording on both
sides of a tape.
PROGRAM be
DISC 1-5 u
1 Create your program (for side A vvhen recording
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 through 4 in "Creating a program
on the player" on page 13.
The () indication appears in the display.
2 When you record on both sides of the tape,
press BE to insert a pause.
The "PAUSE" and (85) indications appear in the
display and the playing time is reset to "0.00."
When you record on one side of the tape, skip this
step and go to Step 4.
A pause is counted as one step
You can program up to 31 steps when you insert a pause.
3 Repeat Steps 2 through 4 in "Creating a program
on the player" to create the program for side B.
4 Start recording on the deck and then press B (the
indicator lights up green) on the player.
When you record on both sides of the tape, the player
pauses at the end of the program for side A.
5 When you record on side B, reverse the tape and
press $ or H on the player to resume playing.
Key You can check and change your program
See page 15.
The (à o) indication appears while checking the program
for side A and (a 5) while checking the program for side
B.
Fading In or Out (ji
You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
FADER
Changing the fading time
1 Press FADER before you start playing.
"FADE 5 SEC" appears in the display.
2 Press €4/P> to specify the fading time.