Transferring X-Dj Channels; About 12 Tone Analysis - Sony Giga Juke NAC-HD1E Operating Instructions Manual

Transferring x-DJ channels

You can register a channel to the HDD
Jukebox as a playlist and then transfer the
playlist to a "WALKMAN" (ATRAC AD).
A maximum of 50 tracks (in the selected
channel) can be selected for the playlist
to be transferred to the "WALKMAN"
(ATRAC AD).
1
Play a track in the channel you want
to transfer.
2
Enter the Option menu and select
[Convert to playlist].
A pop-up window appears.
3
Select [Execute].
A pop-up window appears.
4
Select [Close].
The channel is registered as a playlist.
5
Do the procedure of "Transferring
audio data" (pages 46 to 48) to
transfer the playlist to a "WALKMAN"
(ATRAC AD).
Note
You cannot transfer a playlist to a "WALKMAN"
(ATRAC AD) in "Quick mode". Make sure to do the
transfer in "Standard mode".
Tip
You can view registered playlists by selecting the
playlist mode in the HDD JUKEBOX function.
Playlists are displayed by channel name and date of
registration.

About 12 Tone Analysis

Sony's 12 Tone Analysis technology enables
the unit to analyze the characteristics of
tracks in the HDD Jukebox and categorize
them into 23 channels according to
their mood. When five tracks have been
assembled into a channel, the unit displays
the channel.
Automatic analysis is performed while the
unit is in standby mode. While the unit is
analyzing, the ON/STANDBY indicator
lights up in green and the illumination
panel slowly flashes.
It takes about 15 minutes for the unit to
analyze a 60-minute album. If you record a
large number of music tracks at one time,
it will take a while for the unit to analyze
them.
Note
Make sure not to disconnect the power cord while
the unit is analyzing the recording contents. If you
do, a malfunction may occur.
To cancel an analysis
Press .
The analysis is cancelled. Tracks that were
not analyzed are automatically analyzed
the next time the unit enters standby
mode.
Tip
As a result of an analysis, the same track may be
assigned to two or more channels.
To perform an analysis manually
You can manually perform an analysis of
the tracks that have not yet been analyzed.
1
While the unit is in the x-DJ function, enter
the Option menu and select [Manual-
analysis].
A pop-up window appears.
2
Select [Execute].
A pop-up window appears with a time
progression bar.
To cancel the operation, select [Cancel].
Note
If you record or import a large number of music
tracks at one time, it will take a while for the unit to
analyze them.

GB