Door Parts; Replacing The Glass; Replacing The Door Gasket; Removing The Door - Lopi Evergreen NexGen-Fyre Insert Manual

Door Parts

ID # Description
1 Gasket Cement, 3 oz.
2 Door Gasket
3 Screws (8) 10-24 x ½"
4 Door Retainer
Caution: Use only Travis Industries replacement parts. Do not use substitute materials.

Replacing the Glass

The glass must not contact the door shell or retainer directly. The glass gasket wraps around the edge
of the glass and isolates it from the metal surfaces to prevent cracking. Do not over-tighten the glass
retainer screws.

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower-left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.

Removing the Door

To remove the door, swing the door open 90°. Grasp the door with both hands and lift upwards. If the
door does not disengage, swing it open and closed while lifting upwards to work the door off the hinges.
© Travis Industries
Maintaining Your Appliance
Qty. Part #
1 250-04477
1 250-02832
1 250-03656
1 250-03657
11/8/2021 - 1560
ID # Description
5 Glass
6 Glass Gasket
7 Door Handle Assy.
8 Door Handle
29
Qty. Part #
1 250-03605
1 99900405
1 250-03606
1 250-01305
Evergreen Insert