Weslo GYM 750 User Manual
  1. Manuals
  2. Brands
  3. Weslo Manuals
  4. Fitness Equipment
  5. Gym 750
  6. User manual

Weslo GYM 750 User Manual

Hide thumbs Also See for GYM 750:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
Please provide the following information when ordering replacement parts:
• the MODEL NUMBER of the product (WLEVSY1825.0)
• the NAME of the product (WESLO GYM 750 weight system)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING
attached at the centre of this manual)
Part No. 233986 R1005B
Printed in China © 2005 ICON IP, Inc.
Model No. WLEVSY1825.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GYM 750 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Weslo GYM 750

Summary of Contents for Weslo GYM 750

  • Page 1: Ordering Replacement Parts

    Please provide the following information when ordering replacement parts: Serial Number Decal (Under Seat) • the MODEL NUMBER of the product (WLEVSY1825.0) • the NAME of the product (WESLO GYM 750 weight system) QUESTIONS? • the SERIAL NUMBER of the product (see the front cover of this manual)

  • Page 2: Warning Decal Placement

    Apply the decal in the location shown. VERTICAL WARNING PN 218558 – Black Text/Clear Background PN 218559 – White Text/Clear Background WESLO is a registered trademark of ICON IP, Inc.

  • Page 3: Troubleshooting And Maintenance

    TROUBLESHOOTING AND MAINTENANCE IMPORTANT PRECAUTIONS TIGHTENING THE CABLES WARNING: To reduce the risk of serious injury, read the following important precau- Woven cable, the type of cable used on the weight tions before using the weight system. system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, 1.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN CABLE DIAGRAMS Thank you for selecting the versatile WESLO ® reading this manual, see the front cover of this manu- The cable diagrams below show the proper routing of the Short Cable (47), the Low Cable (48), the Press Cable 750 weight system.

  • Page 5: Weight Resistance Chart

    WEIGHT RESISTANCE CHART ASSEMBLY The chart below shows the approximate weight resistance at each exercise station. “Top” refers to the 6-lb. top weight. The other numbers refer to the 12.5-lb. weight plates. Weight resistance shown for the butterfly arm sta- •...
  • Page 6 2. Attach the Upright (3) to the Base (1) with the two ADJUSTMENTS M8 x 63mm Carriage Bolts (58) and two M8 Nylon Locknuts (69). Do not tighten the Locknuts. This section explains how to adjust the weight system. Refer to the accompanying exercise guide to see the cor- rect form for each exercise.
  • Page 7 4. Slide the eight Weights (15) onto the Weight SEAT ASSEMBLY Guides (10), with the slot for the Weight Pin (not shown) on the bottom and on the side away from the Upright (3). Lubricate 30. Attach the Backrest (18) to the Upright (3) with two M6 x 63mm Screws (67) and two M6 Insert the Weight Tube (12) into the Weights (15).
  • Page 8 26. Wrap the Low Cable (48) under a 90mm Pulley ARM ASSEMBLY (34). Attach the Pulley and two Finger Guards (35) Grease to the bracket on the Base (1) with an M10 x 46mm Bolt (53) and an M10 Nylon Locknut (68). 7.
  • Page 9 22. Wrap the Short Cable (47) over a 90mm Pulley 10. Insert the post on the Left Arm (7) through the (34). Attach the Pulley and two Finger Guards hole in the Press Frame (5). Make sure the Arm (35) to the Double “U”-bracket (42) with an M10 x is behind the indicated bracket on the Press Frame.
  • Page 10 14. Wrap the High Cable (50) over a 90mm Pulley 18. Wrap the Press Cable (49) under a 90mm Pulley (34). Attach the Pulley and two Finger Guards (34). Attach the Pulley and two Finger Guards (35) to the Top Frame (4) with an M10 x 46mm (35) to the Double “U”-bracket (42) with an M10 x Bolt (53) and an M10 Nylon Locknut (68).
  • Page 11 PART LIST—Model No. WLEVSY1825.0 PART IDENTIFICATION CHART—Model No. WLEVSY1825.0 R1005B Key No. Qty. Description Key No. Qty. Description Base “U”-bracket M4 x 19mm Self- M6 x 63mm Screw (67) Stabiliser Pulley Plate tapping Screw (76) Upright Pad Tube M8 x 63mm Carriage Bolt (58) Top Frame M10 x 100mm Bolt Press Frame...
  • Page 12 EXPLODED DRAWING A—Model No. WLEVSY1825.0 EXPLODED DRAWING B—Model No. WLEVSY1825.0 R1005B R1005B 73 67 73 67...

Table of Contents