US Robotics Wireless USB Print Server User Manual page 84

Wireless USB Print Server User Guide
7. Follow the prompts to complete the Wizard.
Windows 9x/ME Setup
Before performing the following procedure, the Wireless USB Print Server must be
installed on your LAN, and configured as described in Installation. Both the Wireless
USB Print Server and the attached printer should be powered ON.
1. Insert the U.S. Robotics Installation CD-ROM into your CD-ROM drive.
2. Click Additional Installs and then select the User.
3. Follow the prompts to complete the installation of the Peer-to-peer Printer Port
Driver.
4. The Print Driver Setup will then launch.
In future, you can click Windows Start > Programs > U.S. Robotics Print Server
> Printer Driver Setup to run the program again.
PTP (Peer-to-Peer) Printer Port Setup
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/printing.html (6 of 14)9/14/2006 4:38:29 PM