US Robotics Wireless USB Print Server User Manual page 81

Wireless USB Print Server User Guide
2. If neither line is present, you will need to install the NetBEUI protocol. Click
Add, Protocol, and then Microsoft. Click NetBEUI and then OK. You may be
prompted for your Windows CD-ROM. This protocol requires no configuration.
If required, you can also install TCP/IP. However, depending on your LAN
environment, TCP/IP may require further configuration.
3. If either protocol is already installed, proceed with installation.
Windows Peer-to-peer Printing
With this printing method, print jobs are stored (queued) on your computer and then
sent to the Wireless USB Print Server when it is available.
Windows 2000 and XP require no additional software.
For other versions of Windows, the supplied PTP (Peer-to-Peer) Printer Port software
must be installed on each computer.
Windows 2000/XP Setup
The recommended printing method is to use LPR, as follows:
1. Open your Printers folder, right-click the desired printer, and select Properties.
2. Select the Ports tab and click Add Port.
3. Select Standard TCP/IP Port and then click New Port.
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/printing.html (3 of 14)9/14/2006 4:38:29 PM