Table of Contents
Advertisement
Wireless USB Print Server User Guide
1. Start the NDPS Manager object you will be using to control the Printer Agent.
2. At the Identification page, click Printer Agent List.
3. Click New to see the Create Printer Agent window, as shown below.
4. Enter the desired name for the Printer Agent (PA) Name.
5. Normally, the NDPS Manager will be the NDPS Manger object you are using.
6. Select Novell Printer Gateway in the Gateway Type.
7. Click OK and then select the available printer.
8. Select Remote (LPR on IP) in the Connection Type.
9. Click Next to see the following Configure Port Handler screen.
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install_netware.htm (3 of 4)9/14/2006 4:36:26 PM
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless USB Print Server and is the answer not in the manual?
Questions and answers