Board Operation; Getting Started - Ide; Getting Started - Arduino Web Editor; Getting Started - Arduino Iot Cloud - Arduino Nano 33 BLE Sense Product Reference Manual

Arduino® Nano 33 BLE Sense
NOTE: Since V feeds V via a Schottky diode and a DC-DC regulator specified minimum input voltage is 4.5V the minimum supply voltage from USB has to be increased
USB IN
to a voltage in the range between 4.8V to 4.96V depending on the current being drawn.

8 Board Operation

8.1 Getting Started - IDE

If you want to program your Arduino Nano 33 BLE while offline you need to install the Arduino Desktop IDE [1] To connect the Arduino Nano 33 BLE to your computer, you'll
need a Micro-B USB cable. This also provides power to the board, as indicated by the LED.

8.2 Getting Started - Arduino Web Editor

All Arduino boards, including this one, work out-of-the-box on the Arduino Web Editor [2], by just installing a simple plugin.
The Arduino Web Editor is hosted online, therefore it will always be up-to-date with the latest features and support for all boards. Follow [3] to start coding on the browser
and upload your sketches onto your board.

8.3 Getting Started - Arduino IoT Cloud

All Arduino IoT enabled products are supported on Arduino IoT Cloud which allows you to Log, graph and analyze sensor data, trigger events, and automate your home or
business.

8.4 Sample Sketches

Sample sketches for the Arduino Nano 33 BLE can be found either in the "Examples" menu in the Arduino IDE or in the "Documentation" section of the Arduino Pro website
[4]

8.5 Online Resources

Now that you have gone through the basics of what you can do with the board you can explore the endless possibilities it provides by checking exciting projects on
ProjectHub [13], the Arduino Library Reference [14] and the on line store [15] where you will be able to complement your board with sensors, actuators and more.

8.6 Board Recovery

All Arduino boards have a built-in bootloader which allows flashing the board via USB. In case a sketch locks up the processor and the board is not reachable anymore via
USB it is possible to enter bootloader mode by double-tapping the reset button right after power up.

9 Connector Pinouts

Pinout
8 / 12 Arduino® Nano 33 BLE Sense / Rev. 01 - 03/12/2021