BITREK BI-530C TREK Operating Manual
  1. Manuals
  2. Brands
  3. BITREK Manuals
  4. GPS
  5. BI-530C TREK
  6. Operating manual

BITREK BI-530C TREK Operating Manual

Vehicles tracking device
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Research and Production Enterprise "DISC SYSTEMS" LTD
EDRPOU 16303375, a/c No.260075014037759
at PJSC "UKREXIMBANK" in c. Kyiv
MFO 380333, TIN 163033726585
03061, Ukraine, c. Kyiv, 95-S Otradny ave., Telephone +38044 507 02 07. Fax +38044 507 02 02. www.bitrek.eu, sales@bitrek.eu
Vehicles Tracking Device
BI-530C TREK
Operating manual
Version 2020.12.3
www.bitrek.eu
sales@bitrek.eu
+372 880 78 78

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BI-530C TREK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BITREK BI-530C TREK

Summary of Contents for BITREK BI-530C TREK

  • Page 1 EDRPOU 16303375, a/c No.260075014037759 at PJSC "UKREXIMBANK" in c. Kyiv MFO 380333, TIN 163033726585 03061, Ukraine, c. Kyiv, 95-S Otradny ave., Telephone +38044 507 02 07. Fax +38044 507 02 02. www.bitrek.eu, sales@bitrek.eu Vehicles Tracking Device BI-530C TREK Operating manual Version 2020.12.3...

  • Page 2: Table Of Contents

    Introduction ...................... 3 Safety requirements within installation and maintenance of “BI-530C TREK” tracking device ....................3 Transportation and storage ................3 Warranty ...................... 3 Device ......................3 Purpose ......................3 Operation principles ..................4 Technical specifications ................... 4 Supply package ..................... 6 Preparation for operation, commissioning .............

  • Page 3: Introduction

    Device Purpose Tracking device “BI-530C TREK” shall be applied to solve issues of navigation, remote control and monitoring of a vehicle or other remote object. The tracking device is designed to be installed on any mobile or remote stationary object in order to: ...

  • Page 4: Operation Principles

    Transmitter power Up to 1 W 1575,42 MHz (L1) GPRS class LBS, GPS or LBS, Navigation system GPS/GLONASS GSM antenna Internal Internal GPS antenna (External – optional) RS-485, j1708, RS-232, Digital interfaces 1-Wire, CAN www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 5 Housing protection class IP54 Body material Plastic ABS UL94 V0 Design of tracking device Appearance and dimensions of the tracking device “BI-530C TREK” are shown in Figure 1. Figure 1 – Appearance and design of the device. www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 6: Supply Package

    Supply package The tracking device “BI-530C TREK” is provided with the following set: 1. Tracking device “BI-530C TREK” – 1 piece. 2. Connection cable – 1 piece. 3. Technical data sheet – 1 piece. 4. Warranty card – 1 piece.
  • Page 7 RS-232_RX In/Out Signal “RX” RS-232 Grey AN_in1 Input Analogue input No.1 RS-485B/ Green Input Signal "B" RS-485/CAN j1708 «B» CAN j1708 "+" onboard power supply (rated +V_in Power voltage 12 V or 24 V) www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 8: Assembly, Commissioning

    UART service output socket is located on the board of the device next to the SIM-card slot. To access the socket, remove the side cover of the device. Procedure of connection of USB-UART converter cable is www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 9: Description Of Indication

    Figure 4 – Connection of the cable of USB-UART converter to the device “BI-530C TREK”. Once connected, the device will transmit data about its state to the terminal. In addition, the user is able to use a terminal program to send commands to a device and receive response to them.

  • Page 10: Adjustment Of "Bi-530C Trek" Device

    Adjustment of “BI-530C TREK” device Basic information The tracking device “BI-530C TREK” can be configured in following ways: 1. With a direct connection of the device to a computer. 2. Remotely, using SMS commands.
  • Page 11 Request of device coordinates. Command to be send – getmap; Example of response: «www.biakom.com/maps/q=50.420209,30.428448,12,0» Request of the version of the device software Command to be send – getver; Example of response: «BI-530С Ver: 1.3.5» www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 12 Val – current value of parameter. Example of the command to request APN of the device (a parameter that contains the APN device has ID 0242) – getparam 0242; Example of response: «Param ID 0242 Val: gps.utel.ua». www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 13: List Of Control Commands To Operate The Device

    Param ID – ID of parameter to be set up; New Val – assigned value of parameter. Example of the command to set APN of the device (a parameter that contains the APN device has ID 0242) – setparam 0242 gps.utel.ua; www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 14 Command to be send – BOOT #,#,#; Example of command to update the software: «BOOT fw.bitrek.ua,80,*.bin;» , where: «HOST» - (fw.bitrek.ua,) is address of server locating the update files; «PORT» – (80,) – port of server locating the update files; «Firmware» (*.bin;) –...

  • Page 15: Basic Configuration

    To record the telephone numbers in the memory device use the parameters ID 0261 – ID 0269 (Appendix 1). Total up to 9 phone numbers can be applied. When using this function, the device will www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 16: Adjustment Of I/O Elements

    7 – generation of the event to change the input value to a predetermined value; 8 – generation of the event to change the input value to a predetermined value + monitoring Averaging constant From 0 and higher www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 17 1 – Leaving the range. The event will be generated if the actual sensor value is outside the predetermined range. Example: The lower voltage limit is set to 0, the upper limit is set www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 18 4 – Monitoring + entering the range. When there is generated the event after entering the range, the actual value of the sensor starts to be transmitted to the server in the monitoring mode. www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 19: Notifications

    SMS, shall be defined as a trigger for outgoing SMS messages. In addition to the SMS message you can add customized text, where the text length shall not exceed 30 characters in the Latin alphabet. www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 20: Roaming Options

    Roaming options The tracking device “BI-530C TREK” is able to operate in two modes: in the home network mode and in the operating mode with a predetermined list of authorized operators. Operation mode is set with ID 0917 parameter. In the home network mode (ID 0917 = 0), the device makes...

  • Page 21: Configuring The Device For Working With Fuel Level Sensors By Rs-485

    (see Appendix Setting the device for temperature sensors The tracking device “BI-530C TREK” is able to work with temperature sensors DS18B20. There can be connected up to five temperature sensors. To work with the temperature sensors turn on polling mode (ID...

  • Page 22: Setting The Device For Electronic Keys

    Line with electronic key value shall contain exactly 10 characters – numbers 0-9 or uppercase A-F. Each pair of symbols encodes one byte in ASCII representation. The first to be recorded is the low-order byte of www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 23: Configuring The Device For Working With Can-Log

    Only one reader CP-Z2L can be connected to the device. Configuring the device for working with CAN-LOG The device “BI-530C TREK” has the ability to work with the CAN- LOG device via the RS-232 interface. To enable the work, you must send the appropriate command: setparam 5007 1;...

  • Page 24: Configuring The Device For Working With Tires Pressure Sensors Via Rs-232

    Speed Limiter device via RS-232 interface. This device allows you to set the boundary limit of the vehicle speed. To work with this device, you must switch the operating mode of the RS-232 interface of the tracker to the value 4: setparam 5007 4; www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 25: Configuring The Device For Working With A Can Bus

    «BI 530С TREK» tracking device has the ability to read data directly from the CAN bus of the vehicle. When connecting the device to the vehicle’s CAN bus, it is recommended to use a Bitrek CANReader contactless reader to prevent violation of the insulating sheath of wires.
  • Page 26 3604 3; Variable setting: setparam 7002 18FEE900; - PGN setparam 7003 32; - start bit of data message setparam 7004 32; - data message length setparam 7005 5; - timeout of data reset in seconds www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 27: Configuring The Device For Working With The J1708 Bus

    300), then switching to another signal source with a lower error will not occur. By default, priority is set for the internal receiver of the device. To change the priority there is a new special parameter ID_Conf 5017 (Appendix www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 28 1 - the source is active; 0 - the bit is not used; Based on this data, it can be established that the external antenna is currently used as a source for determining GPS data. www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 29: Appendix 1 - Device Parameters

    0908 1 byte configuration server (0 – disabled, 1 – enabled) IP or DNS of WEB configurator. settingsHost 0220 string configuration server bitrek.com.ua PORT of WEB settingsPort 0221 2 byte 55755 configuration server Period of connection to settingsTimeOut 0222 2 byte...
  • Page 30 Period of readout by Dist Period 0012 2 byte distance Period of readout by Angle Period 0013 2 byte degree azimuth Period of data transfer to Send Period 0270 2 byte second the server www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 31 0911 1 byte accelerometer (0 – disabled; 1 – enabled) Wait_sleep_ Timeout to go to sleep 4007 2 byte timeout mode by accelerometer Timeout of sleep mode by Sleep timeout 4008 2 byte accelerometer www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 32 Authorized telephone Phone4 0265 string number 4 Authorized telephone Phone5 0266 string number 5 Authorized telephone Phone6 0267 string number 6 Authorized telephone Phone7 0268 string number 7 Authorized telephone Phone8 0269 string number 8 www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 33 Number of rings before ringNum 0912 1 byte automatic response (to check the SIM-card) Time synchronization via NTP_Ena 0909 1 byte NTP (1 – enabled, 0 – disabled) NTP_Port 0348 2 byte NTP-server port www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 34 Text added to the SMS (no more than 30 SMSText 0817 string characters in the Latin alphabet) Roaming Operator 0917 1 byte Operator selection mode selection List of codes of authorized UsipTable 0020...0059 string operators www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 35 The permissible error in Max_HDOP 0998 1 byte 0.01 c.u. the horizontal plane Mode of operation: 0 – disabled; iButtonEna 0991 1 byte 1 – iButton; 2 – CP-Z2L www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 36 R coefficient for Kalman Factor Rm 0954 4 byte c.u. 400000000 filter at motion Coefficient of median Ain1Per 0959 1 byte filtering for analog input c.u. No. 1 (from 1 to 256) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 37 2 byte bps/kbps 0 - OFF; canPGN_1 7002 4 byte HEX Start Bit position canBitStart_1 7003 1 byte (from 0 to 64) Data message length to canBitLength_1 7004 1 byte read (from 0 to 64) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 38 1 byte read (from 0 to 64) Data reset timeout canDataTM_4 7023 1 byte sec. (from 0 to 255) canPGN_5 7026 4 byte HEX Start Bit position canBitStart_5 7027 1 byte (from 0 to 64) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 39 (from 0 to 64) Data message length to canBitLength_8 7046 1 byte read (from 0 to 64) Data reset timeout canDataTM_8 7047 1 byte sec. (from 0 to 255) canPGN_9 7050 4 byte HEX www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 40 1 byte sec. (from 0 to 255) j1708PID_2 7066 1 byte Start Bit position j1708BitStart_2 7067 1 byte (from 0 to 64) Data message length to j1708BitLength_2 7068 1 byte read (from 0 to 64) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 41 1 byte read (from 0 to 64) Data reset timeout j1708DataTM_5 7084 1 byte sec. (from 0 to 255) j1708PID_6 7086 1 byte Start Bit position j1708BitStart_6 7087 1 byte (from 0 to 64) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 42 1 byte (from 0 to 64) Data message length to j1708BitLength_9 7103 1 byte read (from 0 to 64) Data reset timeout j1708DataTM_9 7104 1 byte sec. (from 0 to 255) j1708PID_10 7106 1 byte www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 43 On devices with firmware version 1.4.9 and higher, the speed of the CAN bus is set in bits (setparam 5038 250000). On devices with firmware version 1.4.7 and below, the speed of the CAN bus is set in kilobits (setparam 5038 250). www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 44: Appendix 2 - List Of I/O Elements

    Bits: 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 Internal receiver: 0 - enabled; 1 - configured; GPSPower 0450/0451/0452/0453/0454/0455 2 - active data; 3 - reserved. External receiver: 4 - enabled; 5 - configured; 6 - active data; 7 - reserved. www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 45 Temperature value of temperature Tsens3 0660/0661/0662/0663/0664/0665 sensor 4 Temperature value of temperature Tsens4 0670/0671/0672/0673/0674/0675 sensor 5 Polling of filtered fuel level sensor RS- fuelLevel232 5430/5431/5432/5433/5434/5435 Polling of filtered fuel level sensor fuelLevel1 0580/0581/0582/0583/0584/0585 (1 network address) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 46 0530/0531/0532/0533/0534/0535 (6 network address) Fuel temperature per fuel level sensor fuelTemp232 5410/5411/5412/5413/5414/5415 RS-232 ecoAccel 0960/0961/0962/0963/0964/0965 Value of acceleration of motion ecoBrake 0970/0971/0972/0973/0974/0975 Value of acceleration of braking ecoCrn 5450/5451/5252/5453/5454/5455 Value of corner acceleration www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 47 Activation of I/O-element No. 4 for CAN CAN_5 3640/3641/3642/3643/3644/3645 Activation of I/O-element No. 5 for CAN CAN_6 3650/3651/3652/3653/3654/3655 Activation of I/O-element No. 6 for CAN CAN_7 3660/3661/3662/3663/3664/3665 Activation of I/O-element No. 7 for CAN www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 48 Activation of I/O-element No. 10 for J1708_10 3590/3591/3592/3593/3594/3595 J1708 Reduced accuracy in the horizontal HDOP_ext 0810/0811/0812/0813/0814/0815 plane (external GPS antenna) Sat_int 5520/5521/5522/5523/5524/5525 Number of satellites (internal receiver) Number of satellites (external GPS Sat_ext 5530/5531/5532/5533/5534/5535 antenna) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 49 When using the Wialon IPS protocol, the values of the parameters id_Send 44, 45, 47 are transferred in “g” When using the Teltonika protocol, the values of the parameters id_Send 44, 45, 47 are transferred in “g * 100” www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 50: Appendix 3 - List Of Can-Log I/O Elements

    Engine temperature 5150/5151/5152/5153/5154/5155 °С -60 °С offset Vehicle speed 5160/5161/5162/5163/5164/5165 km/h 1 km/h Load on axle 1 1600/1601/1602/1603/1604/1605 0,5 kg Load on axle 2 5180/5181/5182/5183/5184/5185 0,5 kg Load on axle 3 5190/5191/5192/5193/5194/5195 0,5 kg www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 51 5700/5701/5702/5703/5704/5705 Bit mask D13 D12 (0х1050) State flags for D19 D18 agricultural vehicles 5710/5711/5712/5713/5714/5715 Bit mask D17 D116 (0х1050) State flags for agricultural vehicles 5720/5721/5722/5723/5724/5725 Bit mask (0х1050) Harvesting time 5260/5261/5262/5263/5264/5265 1 min www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 52 D3 D2 D1 D0 Bit mask (0X1030) State flags 5470/5471/5472/5473/5474/5475 D7 D6 D5 D4 Bit mask (0X1030) State flags 5480/5481/5482/5483/5484/5485 Bit mask (0X1030) Security state flags 5640/5641/5642/5643/5644/5645 D3 D2 D1 D0 Bit mask (0х1020) www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 53 No. 35 - for a vehicle Toyota Hilux 2017 this parameter is describes a status of 4-wheel drive (4WD). The number of readable parameters depends on the vehicle equipment. Some options may not be available. www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 54: Appendix 4 - Selecting A Discrete Output Control Source

    88 – monitoring RFID, key validation is active; 120 - monitoring iButton+RFID, key validation is active; Without control source, RFID and iButton monitoring mode only 96 – monitoring RFID+iButton, without key validation, without Out1 control www.bitrek.eu sales@bitrek.eu +372 880 78 78...

  • Page 55: Appendix 5 - List Of Tpms I/O Elements

    °С No.5 Air pressure of wheel 5200/5201/5202/5203/5204/5205 No.6 Air temperature of wheel 5210/5211/5212/5213/5214/5215 °С No.6 Air pressure of wheel 5230/5231/5232/5233/5234/5235 No.7 Air temperature of wheel 5240/5241/5242/5243/5244/5245 °С No.7 Air pressure of wheel 5250/5251/5252/5253/5254/5255 No.8 www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 56 No.13 Air temperature of wheel 5520/5401/5402/5403/5404/5405 °С No.13 Air pressure of wheel 5530/5531/5532/5533/5534/5535 No.14 Air temperature of wheel 5540/5541/5542/5543/5544/5545 °С No.14 Air pressure of wheel 5550/5551/5552/5553/5554/5555 No.15 Air temperature of wheel 5560/5561/5562/5563/5564/5565 °С No.15 www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 57 °С No.20 Air pressure of wheel 5080/5081/5082/5083/5084/5085 No.21 Air temperature of wheel 5090/5091/5092/5093/5094/5095 °С No.21 Air pressure of wheel 5100/5101/5102/5103/5104/5105 No.22 Air temperature of wheel 5110/5111/5112/5113/5114/5115 °С No.22 Air pressure of wheel 5220/5221/5222/5223/5224/5225 No.23 www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 58 Measurement ID at Name of parameter ID at configuration unit transmition Air temperature of wheel 5260/5261/5262/5263/5264/5265 °С No.23 Sensors bitmask 5270/5271/5272/5273/5274/5275 www.bitrek.eu sales@bitrek.eu +372 880 78 78...
  • Page 59 01.12.2020 2020.12.1 Appendix 3 is edited Fixed ID_Send number from 104 to 162 for the CAN log variable 04.12.2020 2020.12.2 "Axle load 1" 10.12.2020 2020.12.3 Changed the bit depth of the ID_Conf 5038 parameter www.bitrek.eu sales@bitrek.eu +372 880 78 78...

Table of Contents