Volvo Penta D16 Operator's Manual page 10

Safety Information
P0024481
P0024808
8
Ventilation when running the engine
WARNING!
Only start the engine in a well-ventilated area. If
operating the engine in a closed area ensure that there
is exhaust ventilation leading out of the work area to
remove exhaust gases and crankcase ventilation
emissions.
The engine must not be operated in areas where there
are explosive materials or stored gas.
Rotating parts and hot surfaces
DANGER!
Working with or approaching a running engine is a
safety risk. Watch out for rotating components and hot
surfaces.
If the engine is in operation and operates another
device, you must not, under any circumstances,
staying close to the engine.
Work on running engines is strictly prohibited. There
are however adjustments that require the engine to be
run. Approaching a running engine is a safety risk.
Loose clothing and long hair can get caught in the
rotating parts; careless movements or a dropped tool
can lead to serious personal injury.
Be careful to avoid hot surfaces (exhaust pipes,
turbochargers, charge air manifolds, start elements
etc.) and hot fluids in pipes and hoses on engines that
are running or have just stopped. Re-install all
protective covers that were removed during
maintenance work before starting the engine.
Information on the engine
IMPORTANT:
Make sure that all warning and information decals on
the product are always visible. Replace decals which
have been damaged or painted over.
D16C-A MG
47711740 05-2019 © AB VOLVO PENTA