Good Ground-Connection; Controller Protection; Others; Controller Operation And Maintenance - MicroStep CC-S1 User Manual

北京欣斯达特数字科技有限公司

Good ground-connection

All parts of the cutting machine and the controller should connect ground.
Controller's ground wire diameter should be over 4 mm2, and try to keep a shorter
distance to the ground.
DC24V ground (-) must break with ground.

Controller protection

Don't ask dusts, metal chips and other materials to go into the controller so that it can't
normally work.
The controller's LCD screen should be protected.

Others

The controller can use U disk and its format is FAT or FAT32
The controller has a manual.
If the controller damages because of abnormal operation, we are not responsible for
maintenance.

Controller operation and maintenance

Only professional operators can use the controller.

Controller operation

Please use fingers to press buttons.
Please don't change functions and parameters at random if you are not familiar with them.
We offer controller operation training for free.
Please feel free to let us know your operation problems.

Controller maintenance

When the controller can't work normally, you need to check relative hardware or wire
connection after power off.
Don't open the controller to repair without professional personnel.
Please feel free to let us know when the controller has problems.

Declaration

Controller guarantee instruction

Guarantee period: within 12 month after leaving our company.
Guarantee terms: during guarantee period any problems under normal operations.
During guarantee period, we charge out of guarantee terms.
We charge for all problems out of guarantee period.
Following situations are beyond guarantee
Any damage under abnormal operation or accident damage;
Damaged by plug in and out controller when power on;
Natural disasters;
Repair, disassemble, retrofit, etc. at random without our allowance.
page: 2
Microstep Website http://www.microstep.cc/eng
Beijing Flourishing Start Digital Technology Co., Ltd