Repeating An Image On A Page - Canon MultiPASS F20 Basic Manual

Repeating an image on a page

This feature allows you to copy an image several times onto a single page. You can set the
machine to automatically select the number of times it repeats the image (
can specify the number (
Preparing your image to repeat it manually
To successfully repeat an image manually (with the <MANUAL> setting), do the following:
1
Set the print media size you will be copying on to (
2
Decide the number of times you want to copy the image. You can have
a maximum of four vertical repeats and four horizontal repeats.
3
Your original image must be no larger than one of the divisions. For
example, if you want to make four original-size repeats of your image,
the original image must be no larger than one quarter of the print
media size you are copying on to.
Examples
2 × 2 repeats
Scanned area
NOTE
• The scanned area of a document also depends on the enlargement/reduction ratio.
You are now ready to start copying.
Chapter 6
below).
Document
p. 3-7).
3 × 3 repeats
Scanned area
Document
Copying
p. 6-8), or you
6
6-7