Removing Jammed Paper; Removing Jams In The Paper Output Tray; Removing Jams From The Machine's Interior - Canon MultiPASS F20 Basic Manual

Removing jammed paper

If <CLEAR PAPER JAM> is displayed in the LCD, follow this procedure to clear the paper jam.

Removing jams in the paper output tray

Follow this procedure to remove jams from the paper output tray:
1
Gently pull any jammed paper out of
the paper output tray.
• If you cannot see any jammed paper in the
paper output tray, remove it from the
machine's interior (
2
Press [Resume].
• If you are printing from a Windows
application, follow the instructions displayed
on your computer.

Removing jams from the machine's interior

Follow this procedure to remove jams from the machine's interior:
1
Open the inner cover.
2
Gently pull out any jammed paper from the
machine's interior or from the multi-purpose
tray.
CAUTION
• Do not touch the round shaft
film B, film cable C, ink absorber (sponge part)
D, or any metal parts.
• If the jammed paper tears while you are pulling and
you cannot remove the torn pieces, turn the
machine off then on with the [ON/OFF]. The
jammed pieces will automatically be ejected.
3
Close the inner cover.
4
Press [Resume].
• If you are printing from a Windows application,
follow the instructions displayed on your computer.
Chapter 10
below).
A, transparent
A B C D
10-11
Troubleshooting
10