Appearance - TP-Link DeltaStream DS-P7001-08 Installation Manual

1.2

Appearance

Front Panel
■
The front panel of DS-P7001-08
purposes only. Your device may differ in appearance from the depicted.
The front panel of DS-P7001-04
purposes only. Your device may differ in appearance from the depicted.
PON
The PON port connects to the GPON network via an OLT SFP module and an optical cable. GPON
networks are extended from the PON ports of OLT, and oriented to the locations of ISP's end users.
SFP+
The SFP+ port connects to the uplink network of ISP's central office via an 10 Gbps SFP+ module and an
optical cable.
GE
The GE port connects to the uplink network of ISP's central office via an Ethernet cable.
MGMT
The MGMT port connects to a management terminal like a PC via an Ethernet cable, and then the
network manager can configure and monitor the device via the management webpage.
Console
The Console port connects to a management terminal like a PC via an RJ45 console cable, and then the
network manager can configure and monitor the device via the CLI (Command Line Interface).
Alarm
The Alarm port connects to a monitoring device, sending alarm messages.
Reset
If you want to reset the the device, press and hold the reset button for more than 5 seconds.
is shown as the following figure. The figure is for demonstration
LEDs
is shown as the following figure. The figure is for demonstration
LEDs
DeltaStream GPON Optical Line Terminal
PON
PON
SFP+
GE
MGMT
SFP+ Console
Reset
GE
MGMT
Console Alarm
Introduction
Reset
Alarm
3