Via The Console Port - TP-Link DeltaStream DS-P7001-08 Installation Manual

2. Set the IP address of the PC as 192.168.0.x/24 (x is a number between 2 and 254).
3. You can access the device using the Web UI or the CLI.
Using the Web UI: Open the web browser on the PC. Enter 192.168.0.1 in the address bar to open
■
the web UI of the device. Log in to the web UI. The default username and password are both admin.
The first time you log in, you are required to change the password for security purposes.
Using the CLI: Use a telent or SSH terminal to access 192.168.0.1 to open the CLI of the device.
■
Log in to the CLI. The default username and password are both admin. The first time you log in,
you are required to change the password for security purposes.
4.3

Via the Console Port

1. Connect the Console port of OLT to the management PC using an RJ45 console cable.
2. Start the terminal emulation program (such as the Hyper Terminal) on the PC and configure the
terminal emulation program as follows:
Baud Rate
38400 bps
PC
OLT (DS-P7001-08) Console Port
Data Bits Parity
8
DeltaStream GPON Optical Line Terminal
Stop Bits
None
Flow Control
1 None
Configuration 15