Turning The Printer On And Off; Turning The Printer On - Canon LBP3000 User Manual

Turning the Printer On and Off

The printer can be turned on and off using the power switch on the left side of the
printer body. To avoid running into unexpected problems, be sure to correctly
memorize this procedure.

Turning the Printer On

To begin using the printer, press the " " side of the power switch to turn the printer
on. After performing a self-diagnostic check, the printer is ready to print.
IMPORTANT
Do not turn the printer on again immediately after turning the printer off. If you want to
•
turn the printer on again after turning it off, wait at least 10 seconds after turning the
printer off before turning it on again.
Refer to "Troubleshooting," on p. 6-1 if the printer does not operate properly, or an error
•
message appears in the Printer Status Window.
When you turn the printer on for the first time after installing it, a single sheet of white
•
paper may be ejected from the printer. This is not a malfunction.
1
Press the " " side of the power switch to turn the printer on.

Turning the Printer On and Off

1
1-15