This dialog box allows you to specify detailed finishing settings.
[Paper Source] Sheet
You can specify the following printing preferences in the [Paper Source] sheet.
4
■ [Paper Type]
Specifies the type of paper used in the printer.
Configure this setting as follows:
Printer Driver
[Plain Paper]
[Plain Paper L]
[Heavy Paper]
[Heavy Paper H]
[Transparency]
* When printing envelopes, index card or custom paper, the printer automatically changes the printing mode to suit
the paper type when you change the [Output Size] setting in the [Page Setup] sheet.
* You can only select [Transparency] if the [Output Size] in the [Page Setup] sheet is set to either A4 or Letter size.
4-24
Using the Printing Functions
Setting
Plain Paper (64 to 90 g/m
If the paper curls excessively when you are printing on plain paper (64
2
to 90 g/m
) with the [Paper Type] setting set to [Plain Paper], try
setting the [Paper Type] setting to [Plain Paper L].
Heavy Paper (91 to 163 g/m
Select this if you want to get improved fixing properties over the
results of printing using the [Heavy Paper] setting.
Transparencies
Paper Type
2
), Label Paper
2
)