Clean The Outside Of The Printer - Canon LBP3000 User Manual

Clean the outside of the printer

If dirt and dust builds up on the outside of the main unit after you use the printer for
a long period of time, you should clean the printer. To avoid damage to the printer
and electrical shocks while cleaning, observe the following precautions when
cleaning.
WARNING
Turn the printer off and remove the plug from the wall when you are cleaning the
•
printer. Failure to do so may cause fire or electrical shock.
Do not use alcohol, benzene, thinners or any other inflammable substance. If an
•
inflammable substance comes into contact with the electrical unit inside the
printer it may ignite or cause an electrical shock.
IMPORTANT
Be careful not to use a cleaning agent other than water or a mild detergent mixed with
•
water as it may deform or crack the plastic materials in the printer.
When using a mild detergent, be sure to dilute it with water.
•
This printer does not need to be lubricated. Do not lubricate the printer.
•
1
Turn the printer and computer off
and disconnect the power plug from the power outlet
b
c
, remove the USB cable
a a a a
a
a

Clean the outside of the printer

5
,
b b b b
.
c c c c
5-19