Showroom Program; Demo Mode; Factory Default; Lift Panel - Miele HR16222I Operating Instructions Manual

Showroom Program

This mode enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.

Demo Mode

If you have demo mode activated
Demo Mode is active. The appliance will
not heat up will appear when you turn
on the oven.
– On
Touch OK for at least 4 seconds to
activate demo mode.
– Off
Touch for at least 4 seconds to
deactivate demo mode. The oven
can then be used as normal.

Factory default

– Settings
Any settings that have been altered
will be reset to the factory default
setting.
– Favorites
All Favorites will be deleted.
– Default temperatures
Any default temperatures that have
been changed will reset to the factory
default settings.
– MyMiele
All MyMiele entries will be deleted.

Lift panel

Regardless of the setting selected, as
soon as you start the self-cleaning
cycle, the lift panel goes down
automatically.
– Automatically
The lift panel lifts up automatically as
soon as you switch the oven on.
The lift panel goes down
automatically as soon as you switch
the oven off.
– Manual
Touch the lift panel sensor button to
lift the control panel up and put it
down.
Settings
65