Miele HR 1724-3 G DF Operating Instructions Manual page 73

Problem
The ignitor does not
function properly.
The display is dark.
The oven does not heat
up.
 is flashing in the
display.
 appears unexpect-
edly in the display and
 is flashing at the
same time. The audible
signal might also be
sounding.
Frequently Asked Questions
Possible cause and solution
The breaker in the building's wiring system has
tripped.
 Contact a qualified electrician or Miele Customer
Service if necessary.
There is food residue stuck between the ignitor and
the burner cap.
 Remove any soiling (See "Gas cooktop cleaning
and care").
There is no power to the oven.
 Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Customer Service.
You have only selected an operating mode or a
temperature.
 Select both a mode and a temperature.
The system lock  is activated.
 Switch the system lock off (see "Using the oven –
Operating the clock/timer").
There is no power to the oven.
 Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Customer Service.
Demo mode is activated.  appears.
The oven can be operated, however the heating
elements will not work.
 Deactivate demo mode (see "Using the oven –
Operating the clock/timer").
There has been a power failure.
 Reset the time of day (see "Before using for the
first time").
Cooking times will also need to be reset.
The oven has been operating for an unusually long
period of time, and this has activated the safety shut-
off.
 Turn the mode selector to Off. The oven is ready
for use again immediately.
73