Download Print this page
Intermec SF51 Quick Start Manual

Intermec SF51 Quick Start Manual

Hide thumbs Also See for SF51:

Advertisement

Quick Links

Safety First
This device contains permanent magnets that can generate magnetic
fi elds of greater than 10 gauss. Caution should be used by anyone with a
Pacemaker, Implantable Cardioverter Defi brillator (ICD), or Heart Failure
Device. Check with your doctor for detailed information before using this
device.
Attention: Cet appareil contient des aimants permanents qui peuvent
produire des champs magnétiques supérieurs à 10 gauss. Toute personne
munie d'un stimulateur cardiaque, d'un défi brillateur-cardioverteur
implantable ou d'un appareil visant à pallier les insuffi sances cardiaques
doit faire attention. Avant d'utiliser l'appareil, prenez vos renseignements
auprès de votre médecin.
What Is the SF51?
The SF51 Cordless Scanner is a small, rugged handheld scanner. It is a lightweight, easy-to-use
scanner that uses a Bluetooth™ radio for RF communications.
The SF51 makes data collection easy and includes these features:
Scanner
Scan button
Intermec
Ready-to-Work
indicator
Magnetic connector
Status light
This guide describes how to set basic parameters to start using the SF51. For a list of
additional resources you may need to confi gure the SF51 for your data collection system,
see "Where To Go From Here" in this guide.
Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A.
When you remove the SF51 from its box, save the box and shipping material in case you need
to ship or store the scanner.
The scanner shipping box contains these items:
SF51 Cordless Scanner
Belt clip holder
Quick Start Guide
SF51 Cordless Scanner
Documentation
CD
Out of the Box

Advertisement

loading

Summary of Contents for Intermec SF51

  • Page 1 The SF51 Cordless Scanner is a small, rugged handheld scanner. It is a lightweight, easy-to-use When you remove the SF51 from its box, save the box and shipping material in case you need fi elds of greater than 10 gauss. Caution should be used by anyone with a scanner that uses a Bluetooth™...
  • Page 2 You scan a bar code, the status The SF51 may not be connected to a host. Make sure Point the SF51 at the bar code label and hold the SF51 at a slight angle 15 to 25 cm light fl ashes red for 2 seconds, and the blue Intermec Ready-to-Work indicator is on and •...