Tap Operation: Side Touch Tap - Zenith HydroTap G5 Installation Instructions Manual

[ ]
BOILING
98
General
Settings
Info &
Logs
BOILING SAFETY
Boiling safety lock
Use the safety button to dispense hot water
Hot isolation (additional boiling safety)
3 slow safety button presses required
prior to dispensing

Tap Operation: Side Touch Tap

12:12 PM
°C
.0
MAIN MENU 12:12 PM
System Safety & Energy
Settings Security Saving
[ ] [ ]
Product Register Service
Serial No. Product Technician
12:12 PM
[ ]
IMPORTANT:
For the Industrial Side Touch Tap, to allow
the dispensing of boiling water, the safety
lock setting must be DISABLED using
the LCD touch screen on the Command
Centre.
Press [Menu] - [Safety & Security] -
[Boiling Safety].
Press the toggle to DISABLE "Boiling safety
lock".
Note: "Hot isolation" settings are not
available for the Industrial Side Touch tap.
Controls
Boiling water
Press both RED buttons simultaneously
to dispense boiling water, for 5 - 15
seconds (adjustable). Release the
buttons to stop the flow of water.
Chilled water
Press the BLUE button to dispense
chilled water for 5 - 15 seconds
(adjustable). Release the button to
stop the flow of water.
808081NZ v1.00 03.21 Industrial Tap Instructions 15