Tap Operation - Zenith G4 User Manual

IS - Three Button
3.
Upper RED button for
dispensing boiling water
Middle RED button for
safety lock
Lower BLUE button for
dispensing chilled water
Boiling water:
The three button tap requires
the middle button to be pressed
simultaneously with the RED button
in order to dispense boiling water.
Water will flow from between 5
and 15 seconds (This is user
adjustable). Releasing the button
will stop the flow of water and will
allow the unit to reset for repeat
operations.
Note: No boiling water will be
dispensed when Hot Isolation is
enabled (See page 19 for details)
Chilled water:
Pressing the "BLUE" button allows
the dispensing of chilled water.
Water will flow from between 5
and 15 seconds (This is user
adjustable). Releasing the button
will stop the flow of water and will
allow the unit to reset for repeat
operations.
802743NZ - HT G4-BC-IS-IT, User Guide - Aug 2015 - V2.00

Tap operation

Press both
RED buttons
simultaneously
to dispense
boiling water
Press the
BLUE button
Page 5 of 24