3.2. Network Client Mode (NCM)
Check the C3 Portal or Network RX Station settings information before configuring the camcorder's
network client mode settings.
The following information is required.
• URL or IP address for Connection Control Manager (CCM)
• Port number
• User name
• Password
The following operations can also be configured.
• Controlling the camera from the CCM UI
• Applying camera settings once only or continuously using an "ALL File".
Network Client Mode can be registered in NCM Settings 1 to 3, and the name to be displayed for each
preset can be set.
You can also change the name from the preset number (for example, "MyCCM").
14