Network Client Mode (Ncm); Ftp Server - Sony PXW-Z280 Setup Manual

3.2. Network Client Mode (NCM)

Check the XDCAM air or Network RX Station settings information before configuring the camcorder's
network client mode settings.
The following information is required.
• URL or IP address for Connection Control Manager (CCM)
• Port number
• User name
• Password
The following operations can also be configured.
• Streaming
• Controlling the camera from the CCM UI
• Applying camera settings once only or continuously using an "ALL File".
Network Client Mode can be registered in NCM Settings 1 to 3, and the name to be displayed for each
preset can be set.
You can also change the name from the preset number (for example, "MyCCM").

3.3. FTP Server

An FTP server must be prepared for file transfers.
For secure transfer, the use of FTPS is recommended.
The following information is required.
• CA certificate
• Server URL or IP address
• User name
• Password
14