5.5. Network Communication Test
5.5.1. 4G/LTE USB Modem
After attaching and configuring a 4G/LTE USB modem, the next step is test for network communication
via the USB modem.
It is recommended that you test the USB modem using a computer beforehand (see
Modem"
).
1
Turn on the camcorder, and check that the modem icon appears on the camcorder LCD screen.
When the network connection is working correctly, the modem icon appears.
If you experience any difficulty, see
A signal strength unknown icon (
determined.
5.5.2. Wireless LAN
After configuring a wireless LAN, the next step is to test for network communication via the wireless LAN.
1
Turn on the camcorder, and check that the wireless LAN status indicator appears on the camcorder LCD
screen.
When the network connection is working correctly, the wireless LAN status indicator appears.
If you experience any difficulty, see
"12.1.1. 4G/LTE USB Modem"
) is displayed if the signal strength from the modem cannot be
"12.1.2. Wireless LAN"
35
in the Troubleshooting section.
in the Troubleshooting section.
"3.1.1. 4G/LTE USB