Attach Handle To Vacuum - Bissell MOMENTUM 82G7 SERIES User Manual

A
ssembly
The only tool you'll need to assemble
your vacuum cleaner is a Phillips
screwdriver.

Attach handle to vacuum

1.
Locate the handle and cord wrap.
Remove the screw packet taped to the
handle.
2.
Stand the vacuum upright and from the
rear of the unit, slide the base of the
handle firmly into the grooves at the top
of the vacuum body.
3.
IMPORTANT – before inserting the
screws into the handle, slide the cord
wrap into the handle.
4.
Ensure that the handle and cord wrap
are firmly fit to the vacuum body. If there
are any gaps, continue to push firmly
until the handle and cord wrap are flush.
5.
Insert 2 of the screws provided (3 total)
into the existing holes, attaching the cord
wrap and handle to the body of the vac-
uum. Tighten securely with a screwdriver.
6.
Attach the hose and cord clip by snap-
ping it into the handle of the unit. Secure
it by inserting the screw provided.
7.
Attach the lower hose clip by snapping it
into place and twisting to the right.
w w w . b i s s e l l . c o m
CAUTION:
Do not plug in your
vacuum until you are familiar
with all instructions and
operating procedures.
2.
7.
WARNING:
Plastic film can be dangerous.
To avoid danger of
suffocation, keep away from
babies and children.
3.
6.
5
8 0 0 . 2 3 7 . 7 6 9 1