Assembly; Operations; Attach Handle To Vacuum - Bissell POWERFILTER SUPER-LIGHT 1576 Series Manual

As mbly
No tools required for assembly.

Attach handle to vacuum

1. Connect Extension Wand to Power
Foot nozzle.
2. Connect Hand Vacuum to the
Extension Wand.
NOTE: You can change what tools attach to
the hand vacuum and extension wand.
3. To remove the tool, grasp the two grey
colored buttons and squeeze to release the
lock. Pull up to remove the tool.
4. To attach the tool, align the grooves of the
tool to the guides on the nozzle and push into
place until you hear a click.
3.
Removing dusting tool
from extension wand
Operati s
Cleaning your floors
This vacuum has 2-Speed Brush Roll control.
1. Slide the POWER switch up to the first
position to clean bare floors and delicate
area rugs. (In the first position, the brush
roll spins slowly.)
2. Slide the POWER switch up to the second posi-
tion to clean carpeted areas. In the
second position, the brush roll spins faster
to help pickup debris below the surfaces.
(Recommended for carpeted areas and thick
area rugs.)
1. 2.
4.
Attaching dusting tool
to hand vacuum
CAUTION
Before using your vacuum, make
sure that the dirt container is in
locked position and that all fi lters
are in place. Do not operate your
vacuum without these fi lters.
1. 2.
OFF 1st Position 2nd Position
Low Brush High Brush
Roll Roll
www.BISSELL.ca
5