Power Cord Usage - Bissell MOMENTUM 82G7 SERIES User Manual

O
perations
Special on-board tools continued
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attach-
ment for a longer reach.
Curved Hose Wand: Use with desired
attachment for a longer reach or for
cleaning hard to reach places.
TurboBrush ® : Use rotating brush action for
small areas such as stairs and uphol-
stery.
NOTE: Press gently when using the
TurboBrush to maximize cleaning.
Too much pressure will cause the
brush to stop rotating.

Power cord usage

1. To use your vacuum, remove the cord
and plug it into an electrical outlet.
There are two quick release cord wraps
for easy cord removal. There is a cord
clip that is part of the upper cord wrap
where you can attach the cord when
vacuuming.
2. When you are finished cleaning, turn
vacuum cleaner off.Unplug power cord
by grasping the polarized plug (NOT the
cord) and disconnect from outlet.
3. Loop power cord around cord wraps
on rear of vacuum cleaner. Be sure to
first return the quick release cord wraps
back to their original position before
wrapping the cord.
4. Clip molded plug to power cord to
secure.
w w w . b i s s e l l . c o m
Tip:
Hair, string and small objects can block
the vacuum hose or tools. Check them
occasionally for obstructions.
NOTICE:
The floor brush will continue to rotate
while you use your vacuum for above
floor cleaning. To prevent carpet damage,
do not lean on the vacuum or let the
powerfoot tilt forward.
CAUTION:
The rotating floor brush continues to
rotate while tools are in use. To reduce
the risk of injury from moving parts,
always move the cleaner with the
carrying handle. Always place vacuum
cleaner on the floor with handle in
upright position when using tools.
Never place your fingers under the
cleaner when it is running. Never
place powerfoot on furniture or uneven
surfaces. Do not place vacuum cleaner
close enough to objects to pull them
into rotating brush.
Quick Release
Cord Wraps
8 0 0 . 2 3 7 . 7 6 9 1
9